Lawrence Berliner is a pioneer in protein structure and diagnostic technique research starting at Stanford University, then Ohio State University and now retired from the University of Denver and the Graduate Toxicology Program, Univ. of Colorado School of Pharmacy. His team was the first to develop thiol specific spin labels, which became the basis of Site Directed Spin Labeling (SDSL) for studying membrane protein structure and other proteins that cannot be crystallized. He has been a leader in early detection and prevention of destructive free radical processes. His other research has involved protein-protein interactions, blood coagulation, serine proteases and lactose biosynthesis.

Prof. Richard Spontak, a Distinguished Professor at NC State University, received his Ph.D. from UC Berkeley and pursued post-doctoral research at Cambridge University before joining P&G in 1990 and NC State in 1992. He has published over 300 peer-reviewed journal papers. He has received numerous research awards including the NC State Holladay Medal for Excellence, the ACS (PMSE) Tess Award, the SPSJ International Award, the IChemE Underwood Medal, the ACS (Rubber) Chemistry of Thermoplastic Elastomers Award, and the IOM3 Colwyn Medal. An elected APS, IOM3, ACS-PMSE, and RSC fellow, he is a member of the Norwegian Academy of Technological Sciences.

Yasar Demirel has a background in chemical engineering with degrees from the University of Birmingham, Manchester Institute of Science and Technology, Hacettepe University, and King Fahd University Petroleum & Minerals. He has worked as a professor, lecturer, and visiting scholar at various universities in the US, UK, Turkey, and Saudi Arabia. His thesis topic was three-phase distillation column design and simulation. He also worked as an associate professor and senior lecturer in the Department of Chemical and Biomolecular Engineering at University of Nebraska-Lincoln, Virginia Tech, and Winona State University. He was a full professor and associate professor at Cukurova University in Turkey.

Prof. Litter is Dr. in Chemistry (Buenos Aires University, Argentina), with postdoctoral studies at the University of Arizona, USA. She is a Senior Researcher at the National Research Council (CONICET) and a Full Professor and Consultant at the National University of San Martin (Argentina). She has more than 250 publications in journals, books, and book chapters. She received the Mercosur Prize (2006 and 2011), the Charreau Prize for Regional Scientific-Technological Cooperation, the Prize for Latin American Women in Chemistry (2021), the Houssay Prize (2022), the Konex Award: Merit Diploma and the Platinum Konex Award– Physicochemical and Inorganic Chemistry (2023). She was designated pioneer in photocatalysis in Argentina and is a Member of the World Academy of Sciences, the Academy of Sciences of Latin America, and the Argentine Academy of Environmental Sciences.

Christopher J Koroneos is a chemical engineer who has completed his Ph.D. in Energy Science at Columbia University. He has also taught courses in Process Engineering, Environmental Engineering, and Life Cycle Analysis at various universities in Greece and the United States. His professional experience includes working on projects such as the Ethanol Derivatives Process, the HYGAS Gasification process, and the PYZEL fluidised bed cement process. He is a member of the American Academy of Chemical Engineers and the American Association for the Advancement of Science and Engineering. His research has led to the development of various chemical production plants and chlorine liquefaction systems.

Professor (2011-2016) and the head of the Department of Nuclear Engineering of the Graduate School of Science and Engineering of Tokyo Institute of Technology (2014-2016). Visiting Professor of Shanghai Jiao Tong University, China (2015-2018). Fellow of the Royal Society of Chemistry, UK (2017). Honorary Professor of Frumkin Institute of Russian Academy of Sciences (IPCE RAS) (2018). His major academic field is a Nuclear and Radiochemistry in the in the fields of Spent Nuclear Fuel Cycle, and Partitioning & Transmutation of radioactive wastes, as well. Current projects led by him were JAEA's Advanced ORIENT Cycle and Tokyo Tech's Apres ORIENT for recycling of all of actinides and nuclear rare metals. Author of 19 Patents, 6Books, 168Articles, 51 Reviews. 21stCenturyInvention Award in Japan (2018). Member of the editorial board of 4 Journals, including J. of Radioanal. Nucl. Chem, etc and of ISTR International Symposium.

Dr. Jieshan Qiu, Cheung-Kong Distinguished Professor of Carbon Science and Chemical Engineering, and Dean of Chemical Engineering College, Beijing University of Chemical Technology, China. He is an internationally recognized research and thought leader in chemical engineering and carbon science. His research encompasses both fundamental and applied aspects of carbon materials and science, with a focus on the methodologies of producing carbon materials for energy storage and conversion, catalysis, and environment protection. He has published 800+ papers in peer-reviewed journals, including Nature Mater., Adv. Mater., Adv. Funct. Mater., Adv. Energy Mater., Energy Environ. Sci., PNAS, Nature Commun., Nano Energy, ACS Nano, Angew. Chem. Int. Ed., Chem. Soc. Rev., J. Am. Chem. Soc., Joule, Matter, Chem, Sci. Adv., etc., with citations 55900+ times and h-index of 119 (Google Scholar), and his work has been featured on 70covers of high profile journals. He has been invited to give 160+ plenary/invited/keynote talks in conferences and at universities and research institutes. He has filed160+ Chinese and International patents, of which some have been successfully commercialized in China. He has been awarded 20+ prestigious prizes and awards including the 1st class award for fundamental research and industrialization technologies awarded by the Education Ministry of China. Currently, he is the Associate Editor of Chemical Engineering Science (Elsevier) and Battery Energy (Wiley), and is also on the advisory boards of 20+ high profile journals, including Science China Materials, Energy Technology, Carbon Energy, etc. He is a Clarivate Analytics Highly Cited Researcher from 2018 to 2022in a row, and an Elsevier Highly Cited Chinese Researchers from 2019 to 2022in the field of chemical engineering, and Top 1% highly cited Chinese authors in the field of energy & sustainability in 2019 by the Royal Society of Chemistry. He has served as Associate Editor of the international journals for years, including: Carbon, Flat Chemand ACS Sustainable Chemistry & Engineering.

Said S.E.H. Elnashaie mainly focuses on Steam reforming, Chemical engineering, Hydrogen, Fluidized bed, and Methane reformer. The concepts of his Steam reforming study are interwoven with issues in Waste management, Mechanics, and Methane. His Chemical engineering research integrates issues from Refining, Membrane, and Produced water. His study in Membranes is interdisciplinary in nature, drawing from both Dehydrogenation, Catalysis, and Ethylbenzene. His Fluidized bed research incorporates elements of Membrane reactors, Conservation equations, Chemical reactors, and Natural gas. His studies examine the connections between Methane reformers and genetics, as well as such issues in Small stationary reformers, with regards to Methanol reformers and the Endothermic process.

Dr. Yu Chen Hu received his BS degree in Chemical Engineering from National Taiwan University (1992) and earned his PhD degree in Chemical Engineering from University of Maryland (USA) in 1999. He worked as a post-doc at the National Institutes of Health from 1999 to 2000 and returned to the Department of Chemical Engineering, National Tsing Hua University, Taiwan, in 2000. Dr. Hu's main research interests include vaccine development, gene therapy, tissue engineering, cancer therapy and synthetic biology. Dr. Hu's lab has developed the enterovirus 71 (EV71) vaccine based on virus-like particle technology. Dr. Hu also utilizes baculovirus as a gene vector to deliver various genes encoding microRNA, long non-coding RNA, CRISPR gene regulation and RNA editing systemsinto adult stem cells/cell sheet for tissue regeneration. Dr. Hu's works have paved a new avenue to the use of baculovirus as a novel vector for regenerative medicine. Dr. Hu exploits and develops various CRISPR systems to engineer the genome of various microorganisms, which enables the pathway genes integration into microbial genome and specifically blocking of gene expression in competing pathways. The gene engineering and manipulation allows for developing recombinant microbial strains to produce various chemicals of interest. Dr. Hu has won the Asia Research Award (Society of Chemical Engineers, Japan), Outstanding Research Award (Ministry of Science and Technology, 2006, 2014), BEST Biochemical Engineering Achievement Award, Wu Ta-You Memorial Award (NSC), Outstanding Academia-Industry Research Awardand Outstanding Young Investigator Award. He is inducted as a fellow of American Institute for Medical and Biological Engineering (AIMBE), Fellow Biomaterials Science and Engineering (FBSE) and Fellow of Biotechnology and Biochemical Engineering Society of Taiwan. He is the Program Chair of the TERMIS-AP meeting, 2016. He also sits on the editorial board of more than 10 international journals and currently serves as the associated editor of Current Gene Therapy, Scientific Report, Frontiers in Frontiers in Bioengineering and Biotechnology and deputy editor of Journal of Taiwan Institute of Chemical Engineers. He is also the vice dean of College of Engineering at NTHU and serves as the Vice president of Asian Federation of Biotechnology.

Armen B Avagyan is President R & I Center of PO, FA and PAC, Head of Economic and Investment Policies Sub-Commission of Public Council of RA, member of the Boards of the Committee of Financial-Economic and Budgetary Affairs of Public Council and the Union of Domestic Goods Producers, Expert of EU "Horizon Europe", ERA.NET, EURECA Eurostars, International Cooperation (InCo) and Council of CIS countries.Academic Member of the Greece ATINER Academia, Member of American Chemical Society (ACS), Society of Chemical Industry (US-England, SCI), Reviewer of Springer, Elsevier, Wiley, etc. journals, Author of 2 theories and 3 books. Laureate of "The International Presidents Award for Iconic Achievement" and "Top 100 Professionals" (IBC, Cambridge, England), "The Albert Einstein Award for Excellence" (Top 50 Geniuses of World, ABI, USA), Marquis Who's Who 2017-2018 Albert Nelson Marquis Lifetime Achievement Award (USA), awards of Armenia and former USSR

Dr. Canan Acar is an Assistant Professor of Thermal Engineering at the Faculty of Engineering Technology of the University of Twente. She received her Ph.D. in Mechanical Engineering from Ontario Tech University, where she developed a hybrid photoelectrochemical system that generates heat, electricity, chlorine, hydrogen, and clean water. Her Ph.D. thesis received the Outstanding Doctoral Thesis Award and the Governor-General of Canada's Gold Medal for Academic Excellence. With over 15 years of experience in hydrogen production, storage, and end-use technologies, Dr. Acar has published about 40 international peer-reviewed journal papers and 12 book chapters. She also worked as a sustainability consultant in Chicago, focusing on energy and waste management. Her current research focuses on integrating hydrogen into existing and novel energy systems for optimized decarbonization pathways.

Associate Professor Dr. Ng Eng Poh received his BSc (First Class Honors) degree (2004) in Industrial Chemistry and MSc in Chemistry (2006) from the Universiti Teknologi Malaysia, Malaysia. He obtained his PhD degree in 2009 from University of Upper Alsace, France under the supervision of Prof. Dr. Svetlana Mintova. After post-doctoral work in the University of Caen, France, he was appointed as a senior lecturer in 2010 at the Universiti Sains Malaysia. He is currently an Associate Professor of Physical Chemistry. His main research interests are synthesis and application of nanoporous silica-based materials for adsorption, catalysis and new applications. Currently, he has published more than 150 indexed journals. His current H-index is 35.

Prof. Blaz Likozar is a head of the Department of Catalysis and Chemical Reaction Engineering at the National Institute of Chemistry (NIC), leading the programme "Chemical Reaction Engineering", as well as numerous research projects (15 H2020 / 30 in Horizon Europe alone). His expertise lies (among others) in heterogeneous catalysis materials, modelling, simulation and optimization of process fluid mechanics, transport phenomena and chemical kinetics. He worked at the University of Delaware in 2014-2015 as a Fulbright Program researcher. He has authored >300 articles, was cited >6000 times, having a h-index of 41.

Mr. Suresh Aluvihara completed his postgraduate studies in 2023 at the Department of Chemical and Process Engineering at the esteemed University of Peradeniya in Sri Lanka, a globally renowned institution. His research during his postgraduate studies focused on various disciplines including Environmental Engineering, Material Engineering, Water Treatments, Pollution Control Engineering, and Chemical Engineering. Prior to that, he obtained his undergraduate degree in 2017 from a respected government university in Sri Lanka, specializing in Earth Science and related fields. With a research and academic background, Mr. Aluvihara has authored over 75 publications in reputable journals, international conferences, and workshops, including full papers, conference proceedings, and abstracts, garnering significant citations. He has actively contributed to numerous international research conferences in various capacities such as keynote speaker, invited speaker, featured speaker, guest speaker, moderator, and organizing committee member, both in virtual and physical settings. Currently, Mr. Aluvihara is employed as a researcher in Agricultural Soil Science at an Agricultural Research Institute. In addition to his primary role, he offers his expertise as an editor and reviewer for several research journals in his areas of interest. He is currently leading research projects in Earth Engineering, Chemical Engineering, and Water Engineering. Recognized for his contributions, Mr. Aluvihara has been honored with awards for his achievements as a young scholar and scientist by prestigious organizations. He has also secured competitive opportunities to participate in international research conferences and training workshops.

Dr Xibo Yan received his B.E. degree from Tianjin University and his M.S. degree from Nankai University. He completed his Ph.D. research under the guidance of Prof. Etienne Fleury from INSA de Lyon in 2015. After working as a post-doctoral researcher at Laboratoire Ingénierie des Matériaux Polymères (Lyon) with Dr François Ganachaud and Dr Julien Bernard for three years, he began his independent career as an associate professor at Tianjin University in 2019. He has published more than 30 research articles in SCI journals. His research interests include intelligent polymeric nanomaterials, polymer self-assembly and biomacromolecules.

Dr. Huajun Fan is a full and tenured professor in the Department of Chemistry at Prairie View A&M University (PVAMU) since 2004. For the last five years, he has been PI of the DOE NNSA's MSIPP project entitled "Consortium for Materials Energy Security" before he assumed the PI role at MACH III center. In the last 15 years, he managed more than $12 million in grants, projects and funding from the US National Science Foundation, US Department of Energy, US Department of Education, and US Air Force Research Laboratory. He published more than 30 peer reviewed journal articles with students and close to 90 research posters and presentations at local, regional and national scientific conferences. He established collaborations with Indiana University, Iowa State University, Tennessee State University, Texas Tech University, the University of Texas at San Antonio, Texas A&M University (College Station), the University of Mississippi, Louisiana State University, Central Michigan University, InterAmerican University of Puerto Rico, Pacific Northwest National Laboratory, Lawrence Livermore National Laboratory, and Los Alamos National Laboratory. He also established a computational chemistry modeling research facility at PVAMU.

Lasanthi Sumathirathne is a Postdoctoral Researcher at Northeastern University in Boston, Massachusetts. She has a background in materials science and a focus on material modification and nanosciences . Lasanthi Sumathirathne has contributed to research in various fields, including nanopore sensing, separation science, analytical chemistry, photolithography, microfluidics, and connectors. She has published numerous articles and has an h-index of 9.

Prof. Dr. Sung Hee Joo has over 20 years of experience in Environmental Engineering and Science. She has expertise in the field of advanced treatment technologies for emerging environmental contaminants, environmental nanotechnology, toxicity assessment of nanomaterials, chemical nanoscience, environmental chemistry, the innovative processes of water/wastewater treatment, the application of membrane technology in wastewater, and the fate and transport of contaminants in the environment. She is a recipient of multiple awards and has published research and review papers in scientific journals and am the author of three books, titled "Assessing the Effects of Emerging Plastics on the Environment and Public Health", "Applying Nanotechnology for Environmental Sustainability" and "Modern Inorganic Chemistry: Nanotechnology for Environmental Remediation".

A. Kayode Coker PhD is Engineering Consultant for AKC TECHNOLOGY, an Honorary Research Fellow at the University of Wolverhampton, U.K. a former Engineering Coordinator at Saudi Aramco Shell Refinery Company (SASREF) and Chairman of the department of Chemical Engineering Technology at Jubail Industrial College, Saudi Arabia. He has been a chartered chemical engineer for more than 30 years. He is a Fellow of the Institution of Chemical Engineers, U.K. (C. Eng., FIChemE), and a senior member of the American Institute of Chemical Engineers (AIChE). He holds a B.Sc. honors degree in Chemical Engineering, a Master of Science degree in Process Analysis and Development and Ph.D. in Chemical Engineering, all from Aston University, Birmingham, U.K. and a Teacher's Certificate in Education at the University of London, U.K. He has directed and conducted short courses extensively throughout the world and has been lecturer at the university level. His articles have been published in several international journals. He is an author of eleven books in chemical/petroleum engineering, a contributor to the Encyclopedia of Chemical Processing and Design, Vol. 61, and certified train - the mentor trainer. A Technical Report Assessor and Interviewer for Chartered chemical engineers (IChemE) in the U.K. He is a member of the International Biographical Centre in Cambridge, U.K. (IBC) as Leading Engineers of the World for 2008. Also, he is a member of International Who's Who for Professionals TM and Madison Who's Who in the U.S. He has recently received 3000 reads of his joint authorship with Professor Rahmat Sotudeh Gharebagh in Chemical Process Engineering Volumes 1 & 2 published by Wiley-Scrivener, 20,000 reads of his research activities in ResearchGate.net and about 3000 citations of his works in Academia.edu.

Sara Srebrenkoska (SS) is employed as an Assistant professor at Faculty of Mechanical Engineering, University "Goce Delcev" (UGD) of Stip, Macedonia. SS is a teaching professor at module: mechanical engineering - production technologies. SS has been doing research in the areas of advanced composites materials and automatization of the processes, industrial engineering and management, production engineering, mathematical modeling of the processes, design of the experiment, mechanical characterization of the materials etc. SS authored and co-authored more than 15 published papers. The last research projects are oriented towards development of automatization of the technologies for production of composites, including newly developed prepreg preforms based on synthetic/technical fibers with thermoplastic matrices, which offer potential of production of high performance composites for aerospace and automotive industry and other industries. SS was successfully completed scientific internship at the Faculty of Civil Engineering, Architecture and Environmental Engineering in Lodz University of Technology, 2015. Also SS was the participant of the training schools for applying of sustainable technologies, Skopje, 2012, training for NORM for buildings in Hasselt, Belgium, 2014, trainings in the frame of Cost Action TD1409: Mathematics for industry network and she was participate at SARCOS PhD Meeting on Self-healing Concrete Structures, Novi Sad, 2019.

Mohaned Aboshatta is a PhD researcher at the department of chemical and process engineering, University of Strathclyde, UK. My current area of research is about the utilization of deep eutectic solvents for carbon capture processes and materials science (Low Carbon Technology). My research background is quite eclectic and encompasses subjects such as synthesis, characterization and application of deep eutectic solvents, green composites, energy efficiency, rheology, computational fluid dynamics and mass transfer modelling. He has successfully won some research grants/funding and scholarships. In addition, he has published/presented several articles in local/international conferences and reputable high impact factor journals. Aboshatta is a reviewer and editorial board member of many reputable local/international journals and conferences. He also obtained Postgraduate Certificate in Education (PGCE). Furthermore, Aboshatta is a member, chartered engineer and fellow of several national/local and international professional bodies. These organizations include, but are not limited to, American Society of Chemical Engineers (ASCE, USA), Institution of Chemical Engineers (ICHEME, UK), Associate Fellowship from the Higher Education Academy (AFHEA, UK).

Karol Kyziol is Professor at AGH in the field of Materials Engineering, Head of the Department of Physical Chemistry and Modelling and Head of Laboratory of Vapour Deposited Materials. His academic achievements consist of 118 published scientific publications, including 34 from the base of Journal Citation Reports (including 33 which were published after gaining his doctoral degree), the total IF of which (according to the year of publishing) is ca. 85. Prof. Kyziol is also the co-author of two book chapters, "Handbook of Composite from Renewable Materials", Vol 4, Functionalization, 2017, Published by Wiley Scrivener and "Surface functionalization with biopolymers via plasma-assisted surface grafting and plasma-induced graft polymerization - materials for biomedical application" in vol. "Biopolymer Grafting: Applications", 2018, Elsevier. Additionally, the results of his research were presented at 45 scientific conferences (including 34 international ones). He is a co-author of two patents (PL - 221932 B1, 2016) concerning a method of improving the mechanical properties of Al alloys and PL 236571 B1, 2021) which includes the use of a plasma chemical method to modify on lays for bumpers. His conducted scientific research received several awards for scientific achievement from the Rector of AGH UST (2013, 2014, 2016). Furthermore, the results of the conducted studies concerning aluminum treatment (in cooperation with TUL) were distinguished, inter alia, at the international exhibition INTEX in Kuala Lumpur (Malaysia, 2012). Additionally, at this exhibition the studies received a gold medal and during the exhibitions in Seul (Korea, 2012) and Cluj-Napoca (Romania, 2013) a gold and bronze medal, respectively.

Vitaly Ordomsky is a Senior Researcher at the Université de Lille in France, affiliated with the Unité de Catalyse et Chimie du Solide. He received his MSc and PhD from Moscow State University and has been involved in research related to nanomaterials, heterogeneous catalysis, and green chemistry. Ordomsky has a significant publication record and has been cited numerous times for his work. His expertise and research contributions have been recognized in the field of catalysis and solid state chemistry.He has published numerous articles and has received 4758 citations with an h-index of 46.

Dr. Kwun Nam Hui received his B.Sc. degree in physics from the Hong Kong University of Science and Technology in 2003. He obtained his M.Phil. (2006) and Ph. D. degree (2009) in Electrical and Electronic Engineering from the University of Hong Kong. He is an Associate Professor at the Institute of Applied Physics and Materials Engineering of the University of Macau. His current research focuses on the design and synthesis of nanostructured materials for electrochemical energy storage and conversion, including batteries, supercapacitors, and fuel cells. His research findings have been widely recognized, with over 250 SCI papers published and a h-index of 58 on Google Scholar, accompanied by more than 10,000 citations.

Lingai LUO received her Bachelor's (1982) and Master's (1984) degrees in thermal energy engineering from Harbin Institute of Technology, China. She received her Ph.D. degree (1991) in mechanic and thermal engineering from National Polytechnic Institute of Lorraine (INPL), Nancy, France. She worked as assistant professor (1991-1993) at INPL, as associate professor (1993-1996) at University of Nancy I, and at INPL (1996-2003). From 2003 until 2012 she was a professor at University of Savoie, France. She is now senior research director of French National Center for Scientific Research (CNRS) at the laboratory of thermo-kinetics, Nantes (LTN), France. Dr. Luo is the author of 2 books and about 100 journal articles. From 2007 until 2012, she was the head of laboratory of design optimization and environmental engineering (LOCIE) of CNRS and University of Savoie. She was the cofounder and coordinator of Sino-French Collaboratory for Environmental and Process Engineering (1998 - 2006) and is the head of its successor Sino-French Laboratory for Sustainable Energy (2008-2014) of French CNRS and Chinese Academy of Sciences. She is also an invited professor at 5 Chinese universities/institutions, and Leuphana University at Laneburg, Germany.

Hongying Zhao is an Associate Professor at the School of Chemical Science and Engineering at Tongji University in Shanghai, China. She has been a professor at Tongji University since 2020. Hongying Zhao received her Ph.D. in Chemical Engineering from the University of Alberta in 2008. She also holds an M.Sc. in Applied Chemistry from Tsinghua University (2002) and a B.Sc. in Chemical Engineering from Tsinghua University (2000).In addition to her role at Tongji University, Hongying Zhao serves as an editorial board member in the journal Natural Resources (SCIRP).

Will be updated Soon.........................

As the first author and corresponding author, Angyang Yu has published more than 30 scientific articles in many international journals. He had served as a teaching faculty in Liaoning University of Petroleum and Chemical Technology before he obtained his Ph.D. degree at Jilin University of China and performed his Postdoctor's research in Chinese Academy of Sciences. His research directions cover a wide range among physics, chemistry, as well as materials science. To list a few representative research interests: molecular spectra, chemical kinetics, molecular excited states, molecular reaction dynamics and engineering alloy design.

Will be updated Soon.........................

Shizong Wang is an academic researcher and Assistant Professor at Tsinghua University, China. He is affiliated with the Institute of Nuclear and New Energy Technology and has contributed to research in areas such as chemical kinetics, acute toxicity, and pyrolysis. Wang has co-authored two publications and has received 1109 citations with an h-index of 2. His work also encompasses environmental remediation and biochar.

Sadia Samar Ali is a Full Professor in the Department of Industrial Engineering at King Abdulaziz University in Jeddah, Saudi Arabia. She holds a Ph.D. in Operations Research and has extensive engineering and management experience, encompassing teaching, training, research, and mentorship. Her primary research focuses on Sustainable Supply Chain Management, Technology, and Innovation within developing countries, utilizing Optimization and Quantitative Analysis approaches. Dr. Sadia is actively involved with the EURO and IFORS groups, working towards promoting Sustainable and Optimization practices and Smart Technologies practices specific to developing countries. Her research contributions include numerous publications and special issues in esteemed journals such as the International Journal of Production Economics, Annals of Operations Research, International Journal of Production Research, Computers In Industrial Engineering, IEEE Transactions on Engineering Management, Journal of Cleaner Production, RAIRO, Environmental Sciences & Pollution Research, Computers in Biology and Medicine, Artificial Intelligent Reviews, Central European Journal of Operations Research, and International Journal of Quality & Reliability Management. She serves as an editorial board member and guest editor for various data analytics, optimization, and industrial engineering topics. Driven by a passion for academia and research, Dr. Sadia Samar Ali continues to make impactful contributions to the research field.

Will be updated soon.....................

Tarik Chafik is a full Professor, Research Director, and Master courses coordinator at the Faculty of Sciences and Techniques of Tangier (FSTT) in Morocco. He is the Director of the Laboratory of Chemical Engineering and Valorization of Resources (LGCVR) at FSTT. Tarik Chafik's research interests include materials engineering, catalysis, and chemical engineering. He has published numerous articles and has an h-index of 9. Tarik Chafik received his Ph.D. from the University of Lyon.

Esra Demirdogen started her education in the American Collegiate Institute and continued her academic career at Ege University where she obtained her undergraduate and post graduate degrees. Dr. Demirdogen made her post graduate studies abroad. Upon invitation of esteemed international research groups she visited and worked in more than 10 countries as Project research member, as lecturer and as visiting professor. Upon her return to her country in 2009 she joined Cankiri Karatekin University and established department of chemistry. Assoc. Prof. Dr. Demirdogen is still working as an academic at the Department of Chemistry, Faculty of Science and is the head of Analytical Chemistry Division. She has published more than 60 articles in international peer-reviewed journals, 1 research book, 2 laboratory books and lately edited and translated Green Chemistry And Engineering: A Practical Design, published by Nobel Publishing house in December 2016. She still serves as editor in some distinguished journals and as reviewer for more than 20 journals.She is an active member of Green Chemistry Association, Oregon University, US, Green Technology Group, Lunds University, Sweden, International Hydrology Sciences Association and Hydrology Center, UK, Swedish and Danish Chemical Societies and SusChem (Sustainable Chemistry) Organization. Together with her colleagues, she established Green Chemistry and Sustainable Technology Group in Turkey, which is a very young but very dynamic R&D group consisting of academic sand post-graduate students. She is providing consultancy to various universities, research organizations and government bodies. She also works as the CSO of a private company developing green technologies and methodologies.

Youssef Tamraoui, 35 years old, is an Assistant Professor at Mohammed VI Polytechnic University, Bengurir, Morocco. Graduated from Hassan 1st University, he received his Ph.D. in Jun 2015. He spent two years as post-doctoral fellow at the Materials Science Energy and Nano-engineering Department (UM6P, Morocco). He has strong skills in design and synthesis of functional materials for energy storage and conversion, and catalytic applications (perovskites, Spinel, Apatite's, Scheelite..),as will as the design of smart material for building applications with high performances. With high skills in structural refinements of several types of materials using X-ray powder diffraction, synchrotron radiation, and neutrons powder diffraction. Within sustainable materials and recycling contexts, he has strong skills on the valorization of industrial by-products issued mainly from phosphate industry and their development into new materials with high added value such as the development of geopolymer materials, eco-cement, nano-silica, ceramic wall tile as well as process of phosphogypsum transformation into new products. He also worked on the improvement of phosphoric acid production process by investigating the problematic of heavy metals (Cd, As, Zn, Mg, Al, Ni, Mn.....). In the energy field Dr. TAMRAOUI is working on the development of new functional materials-based local raw materials end natural resources (Graphite; Apatite and phosphate; Nano silica; Manganeseoxide; F class fly ash, clays) for modern application such as solid oxide fuel cell, supercapacitors, CO2 reduction, and batteries. He has authored/co-authored over 60 articles, conference papers, and 6 national and international patents.